The turnout controls for the 13 turnouts within the Carlin section and a display panel showing the position of all 15 turnouts in this part of the layout are done. The idea is to have the knobs along the front edge for each turnout and with LED's on the panel showing the route alignment.
Here is a close up of the panel itself. The turnouts that can create a route through the yard are labeled E1 to E5 (east end) and W1 to W5 (west end). Those use a pair of 2mm green LED's to show the point position. The spur tracks are labeled S1 to S5 and use a bi-color LED with green indicating aligned and red indicating diverging. Notice in the photo below that W4 and W5 are dark. That is because these are going to be on an adjoining section and are not yet fully connected. W5 on the panel has a toggle switch as it is the only one that is using a motor because of it's location.
The connections for the W4 and W5 turnouts have been wired to some plugs that will make it easier to connect things after both sections are installed in the layout.
No comments:
Post a Comment